Schneider Electric TSXSAY1000

The TSXSAY1000 is an I/O module manufactured by Schneider Electric, designed for use with the Modicon Premium Automation platform. It serves as an AS-Interface master module and is compatible with the AS-Interface cabling system. The module operates based on the M2E AS-i profile and supports AS-i version V2.

Configuration

The TSXSAY1000 offers both standard and extended addressing options, allowing for flexible configuration. In standard addressing mode, it can support up to 31 slave devices, while extended addressing expands the capacity for additional slaves. The module supports various types of connectable interfaces, including analog I/Os, discrete I/Os with standard or extended addressing, and safety interfaces with standard addressing.

Connection

For electrical connection, the TSXSAY1000 features a male connector SUB-D with three ways. The module draws power from the integrated power supply of the host platform it is connected to, eliminating the need for a separate power source. It consumes a current of 450 mA at 5 V DC.

The module provides local signaling through a display unit, allowing for convenient monitoring and status indication. Each base or controller in the Modicon Premium Automation platform can accommodate a specific number of TSXSAY1000 modules. The allocation is as follows: one module for TSX570, one module for TSX57C, two modules for TSX571, four modules for TSX572, and eight modules for TSX573, TSX574, TSX575, TSX576, respectively.

Features

Weighing 0.34 kg, the TSXSAY1000 is a compact and lightweight module suitable for various automation applications. It complies with IEC 60068-2-27 and Ea tests standards, ensuring reliability and durability. The module can operate within an ambient air temperature range of 0 to 60 °C, while the storage temperature range is -25 to 70 °C. It has an IP20 degree of protection, offering moderate protection against solid objects.

Regarding sustainability, the TSXSAY1000 is RoHS compliant, indicating that it adheres to the restriction of hazardous substances directive.

Installation

Before installing the TSX SAY 1000 module, Consult the comprehensive information on AS-i V2 bus installation. These documents include the AS-i bus reference manual, the application manuals for software installation, such as TLX DOC PL7 43E, and the installation manual for the AS-i bus using Unity Pro (35006197).

It's important to note that implementing the TSX SAY 1000 module requires PL7 software V4.4 or higher and a V5.6 processor or higher. The TSX SAY 1000 module is compatible with all versions of Unity Pro software.

TSX SAY 1000 module Features:

1. Display block with four status indicator lamps:

• RUN indicator lamp (green): Indicates normal functioning of the module.
• ERR indicator lamp (red): Indicates a module fault when illuminated.
• I/O indicator lamp (red): Indicates a fault on the AS-i bus when illuminated.
• /B indicator lamp (green): Displays slaves with standard or /A address.

1. Display block with 32 indicator lamps (numbered 0 to 31): Allows diagnostics of the AS-i bus and shows the status of each connected slave on the bus.
2. PWR OK indicator lamp (green): Illuminates when the power supply is correct.
3. FAULT indicator lamp (red): Indicates faults connected to the AS-i bus.
4. A/B push-button: Switches between bank A and bank B, providing information about the status of devices on the bus.
5. MODE push-button: Holding this button down initiates slave initialization and switches to OFF-LINE mode. This allows the programming of the slaves through their infrared interface or connection of new diagnostic pocket terminals to the bus. To return to normal mode, press and hold the MODE button again.
6. CANNON SUB D type connector: Used for connection to the AS-i bus.

During assembly and setup, the TSX SAY 1000 module can be positioned in any slot of a TSX RKY rack, except those dedicated to the power supply and processor. For the installation and removal of the module, follow the general procedures for module installation on a Premium PLC. It is possible to perform assembly and dismantling with the PLC and AS-i bus powered on.

The number of modules that can be used per PLC station depends on the type of processor installed. The maximum module limits for different processors are specified in the provided information.

It's important to consult the specific installation manual for Premium PLCs for detailed instructions on module installation and removal, as well as any other relevant guidelines for setting up the TSX SAY 1000 module.

Schneider Electric products are manufactured in France and are designed for Material handling, packaging, and textile machines usage. They come with a 2-year warranty from MRO Electric. We also carry I/O Modules from other manufacturers such as Modicon and ABB.

Contact Us Today For More Information About Schneider Electric Products

Check out the rest of our Schneider Electric product line. Whether it's using our online instant quote feature, giving us a call at (800) 691-8511, or emailing us at sales@mroelectric.com, we strive for customer satisfaction first. This means lower prices and better service for you. For more products like TSXSAY1000, take a look at more from our I/O Modules line. If your current unit has gone bad, take advantage of our Core Exchange program for the most inexpensive route. You can learn more about this program on our FAQ page here. We offer a repair service on all of our TSXSAY1000 products that keep your downtime to a minimum. To stay up to date on manufacturer news, as well as access any of our datasheets, manuals, or other documentation, we suggest you take a look at our blog.