There are two Sinamics S120 CU320 Modules. There is the CU320-2 DP, which is the 6SL3040-1MA00-0AA0, and the CU320-2 PN, which is the 6SL3040-1MA01-0AA0.
These multi-drive Control Units increase axis count and functionality. They have an Ethernet port, as well as more I/O and controller to controller communication. Each unit can manage up to 6 servo or vector axes in a high performance system. For standard systems, up to 12 V/Hz axes can be controlled from one CU320-2 unit. These Control Units significantly reduce system costs, as they increase functionality for positioning, safety integration, and drive control allowing all these functions to be controlled by one unit versus several.
Siemens CU320 control units also provide additional flexibility with a high number of programming options and digital inputs. With up to 12 binary inputs, the modules’ high I/O count add ease of use. The additional Ethernet port expands programming options as well. Overall, the CU320-2 control units allow for simple yet flexible performance with minimal cost and space requirements.
If you want to learn more about these high-performance drives, check out our blog on Sinamics s120 fault codes.
The CU320-2 DP is a Sinamics Control Unit with a Profibus interface. It is a central Control Module in which the closed-loop and open-loop functions are implemented for one or more Line Modules and/or Motor Modules. It can be used with firmware version 4.3 or greater. It has 12 digital inputs, 8 digital inputs/outputs, 4 DRIVE-CLiQ interfaces, a Profibus and Ethernet interface, a serial interface (RS232), an option slot, and 3 measuring sockets.
MRO Electric stocks new and refurbished CU320-2 DP Control Units, which is part number 6SL3040-1MA00-0AA0. If you would like a replacement module, please call 800-691-8511 or email sales@mroelectric.com.
The CU320-2 PN is a Sinamics S120 Control Unit without a Profibus interface. It has the same interfaces as described above, however without the Profibus port. It is also a central control unit with closed-loop and open-loop functions that can be implemented for one or more Line or Motor modules.
MRO Electric stocks new and refurbished CU320-2 PN Control Units, which is part number 6SL3040-1MA01-0AA0. If you would like a replacement module, please call 800-691-8511 or email sales@mroelectric.com.
What could possibly make a sunny afternoon even sweeter? How about discovering what ice cream…
With the constant threat of severe storms, losing power is an inconvenience homeowners and businesses…
Servo motors exist as a crucial component in industrial automation. Without them the entire industry…
Introduction FANUC Servo Amplifier Understanding FANUC servo amplifier alarm codes is crucial for maintaining peak…
For quite a while now, the tech world has been smitten with the Raspberry Pi. …
In industrial automation, the significance role contactors play gets overlooked. These unassuming yet pivotal components…