The 6FC5357-0BB33-0AE2 Sinumerik NCU is part of the Siemens Sinumerik series. It is a Sinumerik 840D/DE NCU 573.3 Pentium III without system software memory. For more info you can check out all of our Siemens products on our website.
Control Techniques Unidrive Option and Solution Modules
The Control Techniques Unidrive Option and Solution Modules will enhance the functionality of your variable speed drives, allowing them to consistently run at peak performance. The modules will easily integrate with your existing automation system. A high speed parallel bus is used between the drive and the module which helps remove delays and will improve the drives reaction time.
The options offered by Control Techniques can be categorized by the following:
- Intelligence and Safety – offering programmable automation and motion option modules
- Communication – offering Ethernet and fieldbus communications option modules
- Feedback – offering encoder and resolver option modules
- Inputs and Outputs – offering additional analog and digital input and output option modules
Control Techniques Commander SE HF Trip Codes
The Control Techniques Commander SE Microdrive series is an AC open loop vector that provides great flexibility as well as a small footprint. Although this series is reliable you may encounter one of the HF Trip codes listed below. These codes are a result of an internal error in the drive. Most often these trip codes can be resolved by powering down and allowing the drive sit for 5 minutes before powering up again.
If the HF Fault code does not clear then your drive will likely require a repair.
6EW1861-2AF Sinumerik Power Supply – Product Info
The 6EW1861-2AF Sinumerik Power Supply is part of the Sinumerik 800 series. The power supply is a 230 V/5 V, 40 A power supply. This unit is still available, but no longer in production from Siemens. We have a picture of this power supply below as a reference. For more info you can check out all of our Siemens products on our website. To get support or order a replacement, you can email sales@mroelectric.com or call 1-800-691-8511.
6SN1123-1AA00-0CA1 Siemens Power Module – Product Info
The 6SN1123-1AA00-0CA1 Siemens power module is part of the Simodrive 611 Series. It is a 1 axis power module that runs with 50A an internal cooling. The motor rated current is 1FT=25A, 1FT6=18A, 1PH=24A, Induction Motors=24A. For more info you can check out all of our Siemens products on our website.
6SN1145-1BA01-0BA1 Simodrive E/R Module – Product Info
The 6SN1145-1BA01-0BA1 Simodrive E/R Module is part of the Simodrive 611 Series. The Simodrive runs on 16/21KW internal power. It is an infeed and regenerative feedback module which is stabilized with internal cooling. It also includes a mains contactor with a break contact. For more info you can check out all of our Siemens products on our website.
6SN1118-0NJ01-0AA1 Simodrive Axis Control – Product Info
The 6SN1118-0NJ01-0AA1 Simodrive Axis Control card is used for 1 axis control. It is used with a loop lock resolver and has the ability for speed and torque to be set by options in the control card. A picture of the 6SN1118-0NJ01-0AA1 is below, for more info on it and our other Siemens products please visit our website.