Recently we had a customer who was working on troubleshooting a FANUC CNC Power Supply alarm that he had on a machine. He was wondering what the different codes stood for, so we wanted to go ahead and list the different alarm codes for this series. These codes apply to power supplies that start with the following prefixes. The “X”s after the H will be numbered, so an example part number is A06B-6087-H130.
A06B-6081-HXXX
A06B-6083-HXXX
A06B-6077-HXXX
A06B-6091-HXXX
A06B-6120-HXXX
A06B-6140-HXXX
A06B-6110-HXXX
AL01: The main circuit power module (IPM) has detected am Error (PSM-5.5,-11)
Overcurrent flows into the input of the main circuit (PSM-15 to –30).
AL02: A cooling fan for the control circuit has stopped.
AL03: The Temperature of the main circuit heat sink has risen abnormally.
AL04: In the main circuit the DC voltage (DC Link) has dropped.
AL05: The main circuit capacitor was not recharged within the specified time.
AL06: The Input Power Supply is abnormal (open phase).
AL07: In the main circuit the DC Voltage at the DC link is abnormally high.
Be sure to check out our article covering FANUC CNC Troubleshooting Frequently Asked Questions here.
A06B-6087-H130 alarm codes
We also provide repair services for FANUC Power Supplies.
Arc flash incidents are among the most dangerous hazards in the electrical industry, posing serious…
Understanding an Arc Flash An arc flash stand as one of the most dangerous electrical…
A Distributed Control System (DCS) is a type of automated industrial control system (ICS) used…
The Effects of Dirty Power In today's tech-driven world, many of our most valuable devices…
The game is almost over, and your team is losing. You can feel the crowd’s…
Whether we want to admit it or not, our entire world economy hinges on the…