The 6SN1123-1AA00-0CA1 Siemens power module is part of the Simodrive 611 Series. It is a 1 axis power module that runs with 50A an internal cooling. The motor rated current is 1FT=25A, 1FT6=18A, 1PH=24A, Induction Motors=24A. For more info you can check out all of our Siemens products on our website.
Category: Siemens
6SN1145-1BA01-0BA1 Simodrive E/R Module – Product Info
The 6SN1145-1BA01-0BA1 Simodrive E/R Module is part of the Simodrive 611 Series. The Simodrive runs on 16/21KW internal power. It is an infeed and regenerative feedback module which is stabilized with internal cooling. It also includes a mains contactor with a break contact. For more info you can check out all of our Siemens products on our website.
6SN1118-0NJ01-0AA1 Simodrive Axis Control – Product Info
The 6SN1118-0NJ01-0AA1 Simodrive Axis Control card is used for 1 axis control. It is used with a loop lock resolver and has the ability for speed and torque to be set by options in the control card. A picture of the 6SN1118-0NJ01-0AA1 is below, for more info on it and our other Siemens products please visit our website.
Simodrive Dipswitch Settings for UE and I/R Modules
On the top of Siemens Simodrive UE and I/R modules there is a series of 6 dipswitches that need to be set correctly before starting up your drive. Below is the table showing the switch settings along with info on the specific switches so you know what the correct Simodrive Dipswitch Settings for your system are.
Simodrive 611 Start Up Check List
When installing a new Sinumerik or Simodrive unit, there is a specific set of checks that you should go through to make sure that everything is functioning properly. Siemens issues the following check list, and we always recommend that people go through the list to avoid any possible issues with a new installation.
Siemens Sinumerik Drive and I/O Alarms
For troubleshooting your Siemens Sinumerik system, here is a list of the Siemens Sinumerik Drive and I/O Alarms directly from the Sinumerik manual. For more info, give us a call at 800-691-8511 or email sales@mroelectric. Our full Sinumerik series is listed here.
Drive and I/O alarms
Alarms
334 Diagnostics Manual, 03/2011, 6FC5398-2CP10-3BA0
300411 Axis %1 drive %2 error when reading a file (%3, %4)
Parameters: %1 = NC axis number
%2 = Drive number
%3 = Error code 1
%4 = Error code 2
Read More
Siemens Simodrive Repair
The Siemens Simodrive series is one of their best selling lines and their most reliable, but that doesn’t mean that the drives will last forever. We’ve been been repairing customers drives for years and pride ourselves on a fast turnaround which is cost effective as well. Customers always want to keep these drives around, as they are a workhorse in the manufacturing industry. The AC drives are used in a range of applications from use in natural gas facilities to pipeline manufacturers around the world, and we’ve been perfecting our Siemens Simodrive repair process to keep these lines running.