The Siemens Micromaster 440 Series was specially designed for applications that require broader functionality and a strong dynamic response to any situation that may come up. The Micromaster 440 drives have an advanced control system that ensures a uniform high drive quality, even during sudden changed in load.
Category: Manufacturers
Siemens Micromaster 420 Series
The Siemens Micromaster 420 Series was designed to be the “Universal Inverter for Every Challenge.” It has a compact design with base components such as reactors and filters to help keep the size down, along with versatility that allows for easy start-up in any situation. The Micromaster drives also have various communication interfaces to ensure usability with all of the common network applications.
6FC5357-0BB33-0AE2 Siemens NCU – Product Info
The 6FC5357-0BB33-0AE2 Siemens NCU is part of the Siemens Sinumerik series. It is a Sinumerik 840D/DE NCU 573.3 Pentium III without system software memory. We also have a picture below, and for more info you can check out all of our Siemens products on our website.
Control Techniques Focus 3 Drives Troubleshooting
The Control Techniques Focus 3 drive is a single-phase analog drive for DC motors. The Focus 3 provides anywhere from ¼ to 5 horsepower and has 2 regenerative and 2 non-regenerative chassis units. Several measures can be taken to keep your drive functioning its best:
- Be sure to keep your drive free of dust, dirt, oil, caustic atmosphere and excessive moisture.
- The control should always be set away from any machines that have a high ambient temperature.
- Air flow should not be restricted by other equipment.
- Keep the drive away from high vibration areas that could cause the connections to loosen or chafe the wires.
6FC5357-0BB33-0AE2 Sinumerik NCU – Product Info
The 6FC5357-0BB33-0AE2 Sinumerik NCU is part of the Siemens Sinumerik series. It is a Sinumerik 840D/DE NCU 573.3 Pentium III without system software memory. For more info you can check out all of our Siemens products on our website.
Control Techniques Unidrive Option and Solution Modules
The Control Techniques Unidrive Option and Solution Modules will enhance the functionality of your variable speed drives, allowing them to consistently run at peak performance. The modules will easily integrate with your existing automation system. A high speed parallel bus is used between the drive and the module which helps remove delays and will improve the drives reaction time.
The options offered by Control Techniques can be categorized by the following:
- Intelligence and Safety – offering programmable automation and motion option modules
- Communication – offering Ethernet and fieldbus communications option modules
- Feedback – offering encoder and resolver option modules
- Inputs and Outputs – offering additional analog and digital input and output option modules
Control Techniques Commander SE HF Trip Codes
The Control Techniques Commander SE Microdrive series is an AC open loop vector that provides great flexibility as well as a small footprint. Although this series is reliable you may encounter one of the HF Trip codes listed below. These codes are a result of an internal error in the drive. Most often these trip codes can be resolved by powering down and allowing the drive sit for 5 minutes before powering up again.
If the HF Fault code does not clear then your drive will likely require a repair.