Author: Brian Hughes

Brian Hughes is a passionate electrical and content developer for MRO Electric. His main interests are in analog circuit design and solid state physics. Brian's professional background includes working on power system designs for commercial and industrial projects.

Setting the Sensor Gap on your Fanuc Spindle Motor

Brian Hughes Leave a comment

Today we will be helping you with your installation of a spindle motor. Alarms are caused by tensions issues with the belt – either being too tight or too loose in relation to the sensor. MRO Electric and Supply offers both new and refurbished FANUC Spindle amps, troubleshooting on our blog for a wide variety of parts, and repair services on any product we offer.

Steps for fixing the sensor gap

  1. Disconnect the wiring inside of the terminal box.
  2. Next take out the 4 bolts that hold the shroud/fan to the motor.
  3. Remove the screws from the cover of the sensor on the motor.
  4.  Loosen the screws holding the sensor in place until you have enough room to be able to slide a piece of paper between the gear and sensor.
  5. Tighten the 2 screws that hold the sensor in place to make sure they do not rub against each other at all.
  6. Fasten the sensor cover back to the sensor and tighten accordingly.
  7. Reattach the shroud and the fan to the motor.
  8. Configure the wiring back to what it was originally.

fanuc cnc

Now that the sensor for your FANUC Spindle amp is corrected, it should work properly. If you are still having issues we recommend looking throughout our blog as we have many articles based on helping the user troubleshoot any and all issues with their motor.

Sometimes you may not have the necessary equipment to make a diagnosis on your motor, but we do. MRO Electric and Supply offers high quality repair services on all motors so you don’t have to worry about it. Please take a look at our website to see all available brands and parts we can service for you.

MRO Electric and Supply has new and refurbished FANUC CNC parts available. For more information, please call 800-691-8511 or email sales@mroelectric.com.

Diagnosing your FANUC Current Alarm

Brian Hughes Leave a comment

If you are getting a high current alarm on your FANUC motor, it is going to be caused by either the motor itself, the drive, or a cable. To begin the process of figuring out which alarm you are receiving you must disconnect the leads from the motor. Try powering it up and look to see if the alarm LED is lit. Fanuc alarms include the HC LED, alarm 8/9/A/B for Servo motors, and alarm 12 for Spindle motors.

  • If you no longer are seeing an alarm, the motor is most likely bad.
  • If you have powered the motor and are receiving the alarm, the issue is most likely with the drive.

Because you have disconnected the leads from the motor, you are able to use an ohm meter/megger to monitor the power levels of the cable and motor, and make sure they are working as intended. Using a megger will help you decide if your motor is grounded correctly where an ohm reader will let you know if your motor has shorted.

Using your ohm meter check for shorts both leg-to-leg and leg-to-ground on each of the legs. The leg-to-leg readings should be consistently low between every leg while the leg-to-ground readings will stay open. The megger is used to check between the leg and ground to see if the problem could be with the terminal box on the motor or any cables connected to it.

Sometimes you may not have the necessary equipment to make a diagnosis on your motor or to troubleshoot, but we do. MRO Electric and Supply offers high quality repair services on all motors so you don’t have to worry about it. Check out our website to see all available brands and parts we can service for you.

MRO Electric and Supply has new and refurbished FANUC CNC parts available. We also offer repair pricing. For more information, please call 800-691-8511 or email sales@mroelectric.com.

Repairing your Modicon Magelis HMI

Brian Hughes 1 Comment

Any amount of downtime is too much for most companies. Parts will break from time to time, and repairs will be necessary. Here at MRO Electric and Supply we are dedicated to providing the best service making sure that your downtime is minimal. Human Interface Terminals(HMIs) are a crucial part of any automation process nowadays, so it is important to make sure it is working correctly. Along with selling both new and remanufactured products, MRO Electric and Supply offers both repair and exchange services.

modicon hmi

Modicon was the first manufacturer to release programmable logic controllers onto the market, and since have been one of the top brands for PLC’s. MRO Electric and Supply have all the parts necessary to run the Magelis HMI at it full potential, including panels, cables, controllers, adapters and any software that may be needed. Along with repairs, we handle installations and programming of drives and controllers so that you don’t have to.

We also offer the option to retrofit your old machines with newer interfaces for the most up-to-date applications and processes. By fitting existing HMI’s with new interfaces you are able to add years to the life span of your automation set up. It is a lot easier to update and fix your existing displays and HMIs than taking the time and money to purchase and fit new parts.

All of our repairs come with a 12 month guarantee. Our repair service is based on doing the right job, and getting your part back to you as soon as possible. Every part we refurbish is tested to make sure they work the way they are supposed to. Our factory-trained technicians have many years working with Modicon products.

For a free Modicon Magelis HMI repair quote, please email sales@mroelectric.com or call 800-691-8511.  For more information on our Modicon repair capabilities, you can visit our Modicon Repair page.